Supported by ELDR

🚀 Quick Start

1. Charge Before First Use

   • Battery ships partially charged — fully charge before first use or after long storage.

   • Turn radio off while charging.

2. Power On / Off

   • Rotate the Power/Volume Knob clockwise to turn on and adjust volume.

   • Rotate counter-clockwise until click to power off.

3. Talk & Listen

   • Hold PTT (Push-to-Talk) to transmit.

   • Release to listen.

4. Channels & Settings

   • Use MENU and UP/DOWN keys to browse and adjust settings.

⚠️ Safety Information

• Always attach the antenna before use — risk of electric shock if operated without.

• Do not use near explosive materials, while refueling, or at fuel stations.

• Keep away from prolonged direct sunlight, extreme heat, excessive dust, or moisture.

• Repairs should be done by authorized technicians.

• If smoke or a burning smell occurs, turn off immediately, remove battery, and contact support.

🔧 Features Overview

• 26 programmable radio channels

• CTCSS / CDCSS tone support

• Two-tone signaling

• Built-in FM radio tuner (87–108 MHz)

• Emergency alarm broadcast

• ANI & DTMF ID support

• Two programmable quick-access keys

• VOX hands-free mode with compatible headset

• Optional English voice prompts

• Radio-to-radio wired cloning capability

📦 Included Accessories

🔋 Battery & Charging

• Charge Time: until the LED on charger flashes green.

• Battery Life: ~13 hrs (5% transmit / 5% receive / 90% standby).

• Important: Don’t leave battery fully charged on the charger for long — it may shorten lifespan.

🛠️ Setup & Installation

1. Install Battery

   • Slide top end first, click to lock.

   • To remove: power off, release clamp, and slide down.

2. Attach Antenna

   • Screw clockwise until snug (don’t over-tighten).

3. Belt Clip & Strap

   • Slide into the back slot until it clicks.

4. Headset Connection (optional)

   • Insert firmly into headset port (not for charging).

📟 LCD Display Indicators

• CT / DCS — Tone modes

• VOX — Hands-free active

• NAR — Narrow band enabled

• LOW — Low transmit power

• SCN — Scan active

• Battery level, channel number/name, keypad lock status

🔧 Basic Operations

• PTT: Hold to talk, release to listen

• Menu Navigation:

  • MENU → access & confirm

  • UP/DOWN → navigate

  • V/M | EXIT → back/exit

• Programmable Keys: Can be set for flashlight, scan, quick call, etc. (contact your dealer for setup)

⚙️ Key Functions

• Beep Prompt: Turn button sounds ON/OFF

• Squelch (SQL): Adjust noise filtering (recommend level 3–5)

• VOX Sensitivity: 1 (high) – 10 (low)

• Keypad Lock: Manual or auto after 5/10/20/30 sec

• Channel Scan: Auto-scan saved channels

• Flashlight: Usually Side Key 1 toggle

• Radio Cloning: Connect with clone cable, follow on-screen prompts

💡 Helpful Tips

• Avoid using antenna as a handle — can damage performance.

• If the radio won’t hold charge well, battery may need replacing.

• Check that VOX is turned off if audio is accidentally transmitting.

🔧 Support & Service

For troubleshooting, replacement parts, or service, contact ELDR support.

Supported by ELDR — delivering reliable communication solutions.